Trailer Wiring and Bracket w/ Light Tester For 13‑17 Honda Accord Sedan Coupe w/LED Taillights Plug & Play 4‑Flat Harness
Model: 119148 118144 20114-haWiring Harness (Requires Splicing)
4-Flat Mounting Bracket
4-Flat Car End Tester w/ LED Display
Fits The Following Vehicles:
2013 - 2017 Honda, Accord, Coupe, w/LED Taillights
2013 - 2015 Honda, Accord, Sedan, w/LED Taillights
| Part Number | 119148 |
| Brand | Tekonsha |
| Warranty | 1 Year |
| Installation Instructions |  |
| Part Number | 118144 |
| Fits | 4 Flat Connectors |
| Brand | Tow Ready |
| Mounts electrical connector to attachment bracket Includes screws and nuts Attractive point-of-purchase packaging |
|
| Warranty | 1 Year |
| Part Number | 20114 |
| Fits | 4 Flat Connectors |
| Brand | Tow Ready |
| 4-Flat Car End Tester w/LED Display Plug these testers into any car connector and you will have an instant test of running light circuits. |
|
| Warranty | 1 Year |
Questions or Comments? Call 702-374-8999
Thank you for choosing Tekonsha, the most powerful name in trailer light wiring and brake control system. Our trailer wiring harness is vehicle specific, requires no splicing or cutting of the wires. Simply plug & play and your vehicle will be able to control trailers brake, turn and running lights. Trailer wiring kit comes with a 1 year warranty and everything necessary to install the trailer plug wiring. Tekonsha manufactures a wider range of different products for hooking up trailer lights to your Car Truck or SUV. T-One connectors work great with boat trailer wiring and utility trailer wiring. Typically those trailers will use the standard 4 flat plug which is what our T One connectors offer. If you have an RV Fifth Wheel or any other large type of trailer you will us a 7 pin trailer plug to control your electric trailer brakes. Tekonsha offers 7 pin trailer connector as well. Simply do a search above to see if there is a 7 wire trailer wiring available for hooking up your 7 way. If there is not you can use part number 85343 trailer wiring adapter to convert any 4-Flat into a 7-Way. In addition you will use part number 20506 which will include the rest of wiring needed for electric brake controls. You can also call us or email us any time and we will be able to provide information you need.
Partial list of fitment years:
13 14 15 16 17 2013 2014 2015 2016 2017
$85 15 $111.57 24% OFF
- Best Price on Web Guarantee
- Fastest Shipping
- FREE Shipping
- Pre-Order
We match lower prices from major authorized retailers for brand-new products in original packaging, provided the item is in stock. The competing seller must be an authorized, professional retail business; offers from
individuals, auctions, peer-to-peer sites, or unauthorized sellers don’t qualify. Used, refurbished, or open-box items are excluded.
Please see our full terms for details.
Verify Fitment
$111.57 $85 15
Learn more
Questions? Call our Auto Experts at (877) 869-6690
Get it now, pay later
Select installments at checkout to split your purchase into 4 interest-free payments of $21.25 every 2 weeks.
- No fees, ever.
- No impact on your credit score.
Payment options are offered by Affirm and are subject to an eligibility check and might not be available in all states. CA Residents: Loans by Affirm Loan Services, LLC are made or arranged pursuant to a California Finance Lender license.
Installments in partnership with
.
Affirm and its offerings are supported in English only. Translations are not provided by Affirm.
Product Details
- Brand: Tekonsha
- Model: 119148 118144 20114-ha
- Includes: T-One T-Connector Custom Harness, Mounting Bracket, 4-Flat Car End Tester
Compatibility Chart
Wiring Harness (Requires Splicing)
4-Flat Mounting Bracket
4-Flat Car End Tester w/ LED Display
Fits The Following Vehicles:
2013 - 2017 Honda, Accord, Coupe, w/LED Taillights
2013 - 2015 Honda, Accord, Sedan, w/LED Taillights
| Part Number | 119148 |
| Brand | Tekonsha |
| Warranty | 1 Year |
| Installation Instructions | |
| Part Number | 118144 |
| Fits | 4 Flat Connectors |
| Brand | Tow Ready |
| Mounts electrical connector to attachment bracket Includes screws and nuts Attractive point-of-purchase packaging |
|
| Warranty | 1 Year |
| Part Number | 20114 |
| Fits | 4 Flat Connectors |
| Brand | Tow Ready |
| 4-Flat Car End Tester w/LED Display Plug these testers into any car connector and you will have an instant test of running light circuits. |
|
| Warranty | 1 Year |
Questions or Comments? Call 702-374-8999
Thank you for choosing Tekonsha, the most powerful name in trailer light wiring and brake control system. Our trailer wiring harness is vehicle specific, requires no splicing or cutting of the wires. Simply plug & play and your vehicle will be able to control trailers brake, turn and running lights. Trailer wiring kit comes with a 1 year warranty and everything necessary to install the trailer plug wiring. Tekonsha manufactures a wider range of different products for hooking up trailer lights to your Car Truck or SUV. T-One connectors work great with boat trailer wiring and utility trailer wiring. Typically those trailers will use the standard 4 flat plug which is what our T One connectors offer. If you have an RV Fifth Wheel or any other large type of trailer you will us a 7 pin trailer plug to control your electric trailer brakes. Tekonsha offers 7 pin trailer connector as well. Simply do a search above to see if there is a 7 wire trailer wiring available for hooking up your 7 way. If there is not you can use part number 85343 trailer wiring adapter to convert any 4-Flat into a 7-Way. In addition you will use part number 20506 which will include the rest of wiring needed for electric brake controls. You can also call us or email us any time and we will be able to provide information you need.
Partial list of fitment years:
13 14 15 16 17 2013 2014 2015 2016 2017
Get Expert Help
Trailer Wiring and Bracket w/ Light Tester For 13-17 Honda Accord Sedan Coupe w/LED Taillights Plug & Play 4-Flat Harness Install Notes
Installation Instructions for T-Connector Adapter for Accord w/LED Taillights
Part Numbers:
- 118586
Tools Required:
- Trim Panel Remover
- 10mm Socket & Ratchet or 10mm Wrench
- Drill (3/32” Drill Bit)
- Wire Crimpers
- Wire Cutters
- Test Probe
- Phillips Head Screwdriver
Step-by-Step Instructions:
-
Open the Trunk:
- Remove the threshold panel.
- On both the driver and passenger sides, partially remove the corner felt trunk liner to expose the vehicle’s taillight wiring harness.
-
Locate the Taillight Wiring Harness:
- On the driver’s side, locate the taillight wiring harness.
- Disconnect the connectors carefully, ensuring not to break the locking tabs.
- Ensure all connector surfaces are clean and free of dirt.
-
Connect the Driver-Side T-Connector:
- Attach the T-Connector containing the yellow and brown wires between the vehicle’s wiring connectors.
- Lock the connectors securely in place.
-
Route the Passenger-Side T-Connector:
- Route the T-Connector containing the green wire below the threshold cover to the passenger’s side taillight housing.
- Repeat Step 3 for the passenger side using the green and red wires.
-
Mount the Black Box:
- On the driver’s side, locate a flat surface in an out-of-the-way place and mount the T-Connector’s black converter box using the provided double-sided tape.
-
Ground the White Wire:
- Locate a suitable grounding point on the driver’s side near the connectors.
- Drill a 3/32” hole and secure the white wire using the provided eyelet and screw.
Caution:
- Verify the area behind the surface before drilling to avoid damage or injury. Do not drill into exposed surfaces.
-
Connect the Power Wire:
- Locate the red 12-gauge power wire from the T-Connector black box.
- Attach the provided black 12-gauge wire to the red wire using the yellow butt connector.
-
Route the Black Wire:
- Route the black wire through a grommet and along the exterior frame or thresholds to the engine compartment, avoiding areas that may pinch or damage the wire.
Warning:
- Avoid routing near hot pipes, heat shields, or fuel tanks.
-
Connect to the Vehicle Battery:
- Disconnect the vehicle’s negative (-) battery cable.
- Attach the yellow fuse holder to the positive (+) battery cable using the provided ring terminal.
- Connect the black wire to the fuse holder using the yellow butt connector.
- Insert the 10-amp fuse into the fuse holder.
-
Reconnect the Battery:
- Reconnect the vehicle’s negative (-) battery cable.
- Test the installation with a test light or trailer.
Warning:
- Ensure all connections are complete before testing. Reset the vehicle’s electrical system by temporarily removing the key from the ignition.
-
Secure the Wiring:
- Use the provided cable ties to secure the harness, avoiding areas that may pinch, cut, or melt the wire.
-
Reassemble the Vehicle:
- Reinstall all removed panels, thresholds, storage covers, and floor coverings, ensuring no wires are pinched or damaged.
Specifications:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: 5.6 amps
Safety Notes:
- Overloading circuits can cause fires. Do not exceed the towing manufacturer’s ratings or specified circuit ratings.
- Always wear safety glasses and follow safety precautions during installation.
Manufacturer Notes:
- Store the 4-flat connector in the driver-side storage compartment when not in use.
- Refer to the vehicle owner’s manual and instruction sheet for additional details.
Installation Instructions for T-Connector Adapter for Accord w/LED Taillights
Part Numbers:
- 118586
Tools Required:
- Trim Panel Remover
- 10mm Socket & Ratchet or 10mm Wrench
- Drill (3/32” Drill Bit)
- Wire Crimpers
- Wire Cutters
- Test Probe
- Phillips Head Screwdriver
Step-by-Step Instructions:
-
Open the Trunk:
- Remove the threshold panel.
- On both the driver and passenger sides, partially remove the corner felt trunk liner to expose the vehicle’s taillight wiring harness.
-
Locate the Taillight Wiring Harness:
- On the driver’s side, locate the taillight wiring harness.
- Disconnect the connectors carefully, ensuring not to break the locking tabs.
- Ensure all connector surfaces are clean and free of dirt.
-
Connect the Driver-Side T-Connector:
- Attach the T-Connector containing the yellow and brown wires between the vehicle’s wiring connectors.
- Lock the connectors securely in place.
-
Route the Passenger-Side T-Connector:
- Route the T-Connector containing the green wire below the threshold cover to the passenger’s side taillight housing.
- Repeat Step 3 for the passenger side using the green and red wires.
-
Mount the Black Box:
- On the driver’s side, locate a flat surface in an out-of-the-way place and mount the T-Connector’s black converter box using the provided double-sided tape.
-
Ground the White Wire:
- Locate a suitable grounding point on the driver’s side near the connectors.
- Drill a 3/32” hole and secure the white wire using the provided eyelet and screw.
Caution:
- Verify the area behind the surface before drilling to avoid damage or injury. Do not drill into exposed surfaces.
-
Connect the Power Wire:
- Locate the red 12-gauge power wire from the T-Connector black box.
- Attach the provided black 12-gauge wire to the red wire using the yellow butt connector.
-
Route the Black Wire:
- Route the black wire through a grommet and along the exterior frame or thresholds to the engine compartment, avoiding areas that may pinch or damage the wire.
Warning:
- Avoid routing near hot pipes, heat shields, or fuel tanks.
-
Connect to the Vehicle Battery:
- Disconnect the vehicle’s negative (-) battery cable.
- Attach the yellow fuse holder to the positive (+) battery cable using the provided ring terminal.
- Connect the black wire to the fuse holder using the yellow butt connector.
- Insert the 10-amp fuse into the fuse holder.
-
Reconnect the Battery:
- Reconnect the vehicle’s negative (-) battery cable.
- Test the installation with a test light or trailer.
Warning:
- Ensure all connections are complete before testing. Reset the vehicle’s electrical system by temporarily removing the key from the ignition.
-
Secure the Wiring:
- Use the provided cable ties to secure the harness, avoiding areas that may pinch, cut, or melt the wire.
-
Reassemble the Vehicle:
- Reinstall all removed panels, thresholds, storage covers, and floor coverings, ensuring no wires are pinched or damaged.
Specifications:
- Max. stop/turn light: 1 per side (2.1 amps)
- Max. tail lights: 5.6 amps
Safety Notes:
- Overloading circuits can cause fires. Do not exceed the towing manufacturer’s ratings or specified circuit ratings.
- Always wear safety glasses and follow safety precautions during installation.
Attention: This is a summary of the installation procedure. For complete installation instructions, including diagrams and detailed information from the manufacturer, please download the full installation PDF.
Warranty Information:
- For complete warranty instructions, please download the full installation PDF.
Technical Support:
- For technical support and assistance, our team of experts is available to help. You can reach our tech support by visiting www.trailerjacks.com or calling 877-869-6690.
Manufacturer Notes:
- Store the 4-flat connector in the driver-side storage compartment when not in use.
- Refer to the vehicle owner’s manual and instruction sheet for additional details.
Related Products
-150x150.webp "Trailer Tow Hitch Hardware Fastener Kit For 09-14 Acura TL TSX 08-17 Honda Accord 1 1/4\" Receiver Class 1")
