Product Details
- Brand: Rola
- Model: 2006200-5
- Includes: Van Roof Rack
Compatibility Chart
Description
Get Expert Help
Gutter Mount Ladder Rack for 79-14 Ford Van Cargo Van Ladder Lumber Rack 2 Racks Install Notes
Installation Instructions for Telescoping Van Bar Carrier
Part Number:
- 2006200
Tools Required:
- Wrenches/Sockets: 1/2"
- Drill Bits: 5/16"
- Additional Tools: Center Punch, Drill
Hardware List:
- 5/16" x 2" Hex Head Bolt (A) - QTY 2
- Inner Bar Assembly (B) - QTY 2
- 5/16" Locknut (C) - QTY 30
- Outer Bar Assembly (D) - QTY 2
- Stanchion (E) - QTY 4
- 5/16" x 3/4" Carriage Bolt (F) - QTY 16
- 5/16" x 1-1/2" Hex Head Bolt (G) - QTY 4
- 5/16" x 1" Carriage Bolt (H) - QTY 8
- 5/16" Flat Washer (I) - QTY 12
- Mounting Bracket (J) - QTY 2
Assembly Instructions:
Step 1: Assemble Inner and Outer Bars
- Attach the Inner Bar Assembly (B) to the Outer Bar Assembly (D) using 5/16" x 3/4" Carriage Bolts (F).
- Secure the bars to the Stanchions (E) with 5/16" x 1" Carriage Bolts (H), Washers (I), and Locknuts (C). Leave the locknuts lightly tightened to allow movement.
Step 2: Install onto Vehicle
- Insert the inner bar into the outer bar and place the assembly onto the vehicle's roof.
- Position the bottom edge of each stanchion into the vehicle’s rain gutter and slide the Mounting Brackets (J) over the outside of the rain gutter.
- Tighten the 5/16" x 1-1/2" Hex Head Bolt (G) to pull the bottom edge of the Mounting Bracket (J) upward securely against the rain gutter.
Step 3: Secure the Assembly
- Tighten the locknuts to secure the Mounting Bracket (J) to the Stanchion (E). Ensure the rain gutter is sandwiched securely between the bracket and stanchion.
- Re-tighten the Hex Head Bolt (G) for added stability.
Step 4: Drill and Secure Final Fasteners
- Drill a 5/16" hole through the existing holes in the ends of the outer bar assembly and through both sides of the inner bar.
- Insert a 5/16" x 2" Hex Head Bolt (A) through the drilled holes and secure with a Locknut (C).
Step 5: Tighten All Fasteners
- Verify all fasteners are tightened securely before use. Recheck after installation and before each use.
Safety Notes:
- Load Capacity:
- Maximum load is 150 lbs (68 kg) per bar. For two bars, the combined capacity is 300 lbs (136 kg).
- Periodic Inspections:
- Check for signs of wear, corrosion, or fatigue before every use.
- Ensure all fasteners are securely tightened.
- Vehicle Compliance:
- Follow the vehicle manufacturer's specifications for rain gutter-mounted accessories.
- Secure Loads:
- Use non-stretch tie-downs to secure cargo. Ensure the load is distributed evenly.
Warranty:
- Coverage:
- Limited to repair or replacement of defective products.
- Excludes damage caused by improper installation, overloading, or misuse.
- Warranty Information:
- For complete warranty instructions, please download the full installation PDF.
- Technical Support:
- For technical support and assistance, our team of experts is available to help. You can reach our tech support by visiting www.trailerjacks.com or calling 877-869-6690.
Attention:
This is a summary of the installation procedure. For complete installation instructions, including diagrams and detailed information from the manufacturer, please download the full installation PDF.