-1000x1000.webp "Custom Fit Trailer Hitch Wiring Harness (Plug & Play) 2\" Drop Ball-Mount w/ Pin/Clip 2\" Chrome Ball Installation Hardware Installation Instructions 84382 118416 21536 Reese Tow Package 07-17 Jeep Wrangler 2018 JK Except w/Right Hand Drive T")
-150x150.webp "Custom Fit Trailer Hitch Wiring Harness (Plug & Play) 2\" Drop Ball-Mount w/ Pin/Clip 2\" Chrome Ball Installation Hardware Installation Instructions 84382 118416 21536 Reese Tow Package 07-17 Jeep Wrangler 2018 JK Except w/Right Hand Drive T")
-550x550.webp "Custom Fit Trailer Hitch Wiring Harness (Plug & Play) 2\" Drop Ball-Mount w/ Pin/Clip 2\" Chrome Ball Installation Hardware Installation Instructions 84382 118416 21536 Reese Tow Package 07-17 Jeep Wrangler 2018 JK Except w/Right Hand Drive T")
Tow Package For 07‑17 Jeep Wrangler 2018 JK Except w/Right Hand Drive Trailer Hitch w/ Wiring 2" Drop Mount 2" Ball 2" Receiver Reese
Model: 84382 118416 21536Includes Everything Pictured:
Custom Fit Trailer Hitch
Wiring Harness (Plug & Play)
2" Drop Ball-Mount w/ Pin/Clip
2" Chrome Ball
Installation Hardware
Installation Instructions
Fits The Following Vehicles
Custom Fit Trailer Hitch
Wiring Harness (Plug & Play)
2" Drop Ball-Mount w/ Pin/Clip
2" Chrome Ball
Installation Hardware
Installation Instructions
Fits The Following Vehicles
2007 - 2017 Jeep, Wrangler, Except w/Right Hand Drive
2018 Jeep, Wrangler JK, Except w/Right Hand Drive
2018 Jeep, Wrangler JK, Except w/Right Hand Drive
Trailer Hitch Specs:
| Part Number | 84382 |
| Brand | Reese |
| Finish | Black Powdercoat |
| Class | III/IV |
| Receiver size opening | 2" |
| Max gross trailer weight | 4,500 lbs |
| Max GTW w/ weight distribution | 4,500 lbs |
| Max Tongue Weight | 675/675 lbs |
| Warranty | Lifetime |
| Installation Instructions |  |
Wiring Kit Specs:
| Part Number | 118416 |
| Brand | Tekonsha |
| Warranty | 1 Year |
| Installation Instructions | |
Towing Starter Kit Specs:
| Part Number | 21536 |
| Brand | Reese |
| Fits | 2" x 2" Trailer Hitch Receiver |
| Ball Size | 2" |
| Ball Shank Dia. | 1" |
| Ball-Mount Length | 9" From Center of Pin Hole to Center of Ball Hole |
| Towing Capacity | 6,000 lb Gross Towing Weight 600 lb Tongue Weight |
| Drop | 2" From inside top of hitch opening |
| Rise | 3/4" from top of inside of hitch opening |
| Ball-Mount Finish | Black Powdercoat |
| Ball Finish | Chrome (Cold forged for superior strength) |
| Warranty | Lifetime |
Questions or Comments? Call 702-374-8999
Thank you for choosing Reese the most powerful name in towing industry bar none. Manufactured by the same people that brought you Reese and Hidden Hitch all of our products come with standard lifetime warranty and support. Our custom hitches mount easily on your Car Truck Van SUV and RV. Most applications simply bolt on without any need for drilling or modifying your bumper. Please review installation instructions manual pdf file above for exact step by step instructions. Chose Class 1 or 2 for light duty towing, chose Class 3 4 and 5 for heavy duty towing. Pair your hitch with accessories like a ball mount that is available in several drop and rise configurations. Choose a 2 inch ball to haul most standard trailers. Choose a 1-7/8" ball to tow small and u tility trailers. Our hitches come with generous tongue weight ratings for use with cargo racks and other accessories. All parts in our store are sold at a discount.
For our electrical we rely on Tekonsha. Our Trailer wiring kit comes with a 1 year warranty and everything necessary to install the trailer plug wiring. Tekonsha manufactures a wider range of different products for hooking up trailer lights to your Car Truck or SUV. Our connectors work great with boat trailer wiring and utility trailer wiring. Typically those trailers will use the standard 4 flat plug which is what our Wiring Kits offer. If you have an RV Fifth Wheel or any other large type of trailer you will us a 7 pin trailer plug to control your electric trailer brakes. Tekonsha offers 7 pin trailer connector as well. Simply do a search above to see if there is a 7 wire trailer wiring available for hooking up your 7 way. If there is not you can use part number 85343 trailer wiring adapter to convert any 4-Flat into a 7-Way. In addition you will use part number 20506 which will include the rest of wiring needed for electric brake controls. You can also call us or email us any time and we will be able to provide information you need.
Partial list of fitment years: 07 08 09 10 11 12 13 14 15 16 17 18 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
$203 80 $276.40 26% OFF
- Best Price on Web Guarantee
- Fastest Shipping
- FREE Shipping
- In Stock
Best Price on Web Guarantee
We match lower prices from major authorized retailers for brand-new products in original packaging, provided the item is in stock. The competing seller must be an authorized, professional retail business; offers from
individuals, auctions, peer-to-peer sites, or unauthorized sellers don’t qualify. Used, refurbished, or open-box items are excluded.
Please see our full terms for details.
Verify Fitment
$276.40 $203 80
Pay in 4 interest-free installments of
$50.75
with
Learn more
Learn more
Questions? Call our Auto Experts at (877) 869-6690
Get it now, pay later
Select installments at checkout to split your purchase into 4 interest-free payments of $50.75 every 2 weeks.
- No fees, ever.
- No impact on your credit score.
Payment options are offered by Affirm and are subject to an eligibility check and might not be available in all states. CA Residents: Loans by Affirm Loan Services, LLC are made or arranged pursuant to a California Finance Lender license.
Installments in partnership with
.
Affirm and its offerings are supported in English only. Translations are not provided by Affirm.
Product Details
- Brand: Reese
- Model: 84382 118416 21536
- Includes: Class 3 Trailer Tow Hitch, T-One T-Connector Custom Harness, Trailer Tow Hitch Ball Mount Starter Kit
Compatibility Chart
Description
Includes Everything Pictured:
Custom Fit Trailer Hitch
Wiring Harness (Plug & Play)
2" Drop Ball-Mount w/ Pin/Clip
2" Chrome Ball
Installation Hardware
Installation Instructions
Fits The Following Vehicles
Custom Fit Trailer Hitch
Wiring Harness (Plug & Play)
2" Drop Ball-Mount w/ Pin/Clip
2" Chrome Ball
Installation Hardware
Installation Instructions
Fits The Following Vehicles
2007 - 2017 Jeep, Wrangler, Except w/Right Hand Drive
2018 Jeep, Wrangler JK, Except w/Right Hand Drive
2018 Jeep, Wrangler JK, Except w/Right Hand Drive
Trailer Hitch Specs:
| Part Number | 84382 |
| Brand | Reese |
| Finish | Black Powdercoat |
| Class | III/IV |
| Receiver size opening | 2" |
| Max gross trailer weight | 4,500 lbs |
| Max GTW w/ weight distribution | 4,500 lbs |
| Max Tongue Weight | 675/675 lbs |
| Warranty | Lifetime |
| Installation Instructions | |
Wiring Kit Specs:
| Part Number | 118416 |
| Brand | Tekonsha |
| Warranty | 1 Year |
| Installation Instructions | |
Towing Starter Kit Specs:
| Part Number | 21536 |
| Brand | Reese |
| Fits | 2" x 2" Trailer Hitch Receiver |
| Ball Size | 2" |
| Ball Shank Dia. | 1" |
| Ball-Mount Length | 9" From Center of Pin Hole to Center of Ball Hole |
| Towing Capacity | 6,000 lb Gross Towing Weight 600 lb Tongue Weight |
| Drop | 2" From inside top of hitch opening |
| Rise | 3/4" from top of inside of hitch opening |
| Ball-Mount Finish | Black Powdercoat |
| Ball Finish | Chrome (Cold forged for superior strength) |
| Warranty | Lifetime |
Questions or Comments? Call 702-374-8999
Thank you for choosing Reese the most powerful name in towing industry bar none. Manufactured by the same people that brought you Reese and Hidden Hitch all of our products come with standard lifetime warranty and support. Our custom hitches mount easily on your Car Truck Van SUV and RV. Most applications simply bolt on without any need for drilling or modifying your bumper. Please review installation instructions manual pdf file above for exact step by step instructions. Chose Class 1 or 2 for light duty towing, chose Class 3 4 and 5 for heavy duty towing. Pair your hitch with accessories like a ball mount that is available in several drop and rise configurations. Choose a 2 inch ball to haul most standard trailers. Choose a 1-7/8" ball to tow small and u tility trailers. Our hitches come with generous tongue weight ratings for use with cargo racks and other accessories. All parts in our store are sold at a discount.
For our electrical we rely on Tekonsha. Our Trailer wiring kit comes with a 1 year warranty and everything necessary to install the trailer plug wiring. Tekonsha manufactures a wider range of different products for hooking up trailer lights to your Car Truck or SUV. Our connectors work great with boat trailer wiring and utility trailer wiring. Typically those trailers will use the standard 4 flat plug which is what our Wiring Kits offer. If you have an RV Fifth Wheel or any other large type of trailer you will us a 7 pin trailer plug to control your electric trailer brakes. Tekonsha offers 7 pin trailer connector as well. Simply do a search above to see if there is a 7 wire trailer wiring available for hooking up your 7 way. If there is not you can use part number 85343 trailer wiring adapter to convert any 4-Flat into a 7-Way. In addition you will use part number 20506 which will include the rest of wiring needed for electric brake controls. You can also call us or email us any time and we will be able to provide information you need.
Partial list of fitment years: 07 08 09 10 11 12 13 14 15 16 17 18 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018
Get Expert Help
Tow Package For 07-17 Jeep Wrangler 2018 JK Except w/Right Hand Drive Trailer Hitch w/ Wiring 2" Drop Mount 2" Ball 2" Receiver Reese Install Notes
Installation Instructions for 2007-Current Jeep Wrangler
Part Numbers:
- 76382
- 84382
- CQT76382
Tools Required:
- Ratchet
- Torque Wrench
- Safety Glasses
- Sockets: 16 mm, 18 mm
- Open-End Wrench: 18 mm
- Crowfoot Wrench: 18 mm
- Exhaust Removal Pliers
- Ratchet Strap
Step-by-Step Instructions:
Standard Installation:
-
Lower Muffler or Diesel Canister:
- For standard models, use exhaust removal pliers to lower the muffler.
- For EcoDiesel models, use a 16 mm socket to remove two bolts from the diesel canister. Ensure the exhaust is supported before removing the rubber hangers.
-
Install Hitch:
- Raise the hitch onto the vehicle cross member at a 15°-45° angle and align the leftmost hole in the hitch with the existing hole in the cross member.
- Loosely install the following hardware:
- (1) M12 bolt
- (1) 1/2" flat washer
- (1) 1/2" conical washer
- (1) M12 hex nut
- Use an 18 mm crowfoot wrench and open-end wrench to secure all fasteners. Pull downward gently on the diesel canister for additional clearance, if needed.
-
Tighten Fasteners:
- Tighten all M12 CL8.8 fasteners to 68 lb-ft (92 Nm).
-
Reinstall Muffler or Diesel Canister:
- Reinstall the muffler or diesel canister using the bolts removed earlier.
Mopar Off-Road Bumper Installation:
-
Lower Muffler:
- Follow the same process as in Step 1 of the standard installation.
-
Remove Factory Bolts and Spacer Plate:
- Use an 18 mm socket to remove four factory M12 flange head bolts from the forward side of the vehicle cross member.
- Remove the spacer plate between the vehicle cross member and the Mopar bumper. Return the spacer plate to the vehicle owner.
-
Raise Hitch into Position:
- Align the hitch with the existing holes in the cross member.
-
Install Hitch:
- Reinstall the four factory M12 flange head bolts using an 18 mm socket.
-
Tighten Fasteners:
- Tighten all M12 CL10.9 fasteners to 92 lb-ft (125 Nm).
-
Reinstall Muffler:
- Follow the same process as in Step 4 of the standard installation.
Hardware List:
- (4) Bolt M12x1.75x120 CL8.8
- (4) Conical Washer 1/2”
- (4) Flat Washer 1/2”
- (4) Hex Nut M12x1.75 CL8
Safety Notes:
- Always wear safety glasses during installation.
- Check hitch frequently to ensure all fasteners and the ball are properly tightened.
- Replace damaged hitches or balls immediately.
- Do not cut access or attachment holes with a torch.
- Observe all safety precautions when working under the vehicle.
Specifications:
- Weight Carrying Capacity: 4,500 lbs (2,043 kg) trailer weight, 675 lbs (306 kg) tongue weight.
- Weight Distributing Capacity: 4,500 lbs (2,043 kg) trailer weight, 675 lbs (306 kg).
- Product complies with V.E.S.C. Regulation V-5 and SAE J684.
Installation Instructions for Vehicle Models (2007-Present)
Part Numbers:
- 76382
- 84382
- CQT76382
Tools Required:
- Ratchet
- Torque Wrench
- Safety Glasses
- Sockets: 16 mm, 18 mm
- Open-End Wrench: 18 mm
- Crowfoot Wrench: 18 mm
- Exhaust Removal Pliers
- Ratchet Strap
Step-by-Step Instructions:
Standard Installation:
-
Lower Muffler or Diesel Canister:
- For standard models, use exhaust removal pliers to lower the muffler.
- For EcoDiesel models, use a 16 mm socket to remove two bolts from the diesel canister. Ensure the exhaust is supported before removing the rubber hangers.
-
Install Hitch:
- Raise the hitch onto the vehicle cross member at a 15°-45° angle and align the leftmost hole in the hitch with the existing hole in the cross member.
- Loosely install the following hardware:
- (1) M12 bolt
- (1) 1/2" flat washer
- (1) 1/2" conical washer
- (1) M12 hex nut
- Use an 18 mm crowfoot wrench and open-end wrench to secure all fasteners. Pull downward gently on the diesel canister for additional clearance, if needed.
-
Tighten Fasteners:
- Tighten all M12 CL8.8 fasteners to 68 lb-ft (92 Nm).
-
Reinstall Muffler or Diesel Canister:
- Reinstall the muffler or diesel canister using the bolts removed earlier.
Mopar Off-Road Bumper Installation:
-
Lower Muffler:
- Follow the same process as in Step 1 of the standard installation.
-
Remove Factory Bolts and Spacer Plate:
- Use an 18 mm socket to remove four factory M12 flange head bolts from the forward side of the vehicle cross member.
- Remove the spacer plate between the vehicle cross member and the Mopar bumper. Return the spacer plate to the vehicle owner.
-
Raise Hitch into Position:
- Align the hitch with the existing holes in the cross member.
-
Install Hitch:
- Reinstall the four factory M12 flange head bolts using an 18 mm socket.
-
Tighten Fasteners:
- Tighten all M12 CL10.9 fasteners to 92 lb-ft (125 Nm).
-
Reinstall Muffler:
- Follow the same process as in Step 4 of the standard installation.
Hardware List:
- (4) Bolt M12x1.75x120 CL8.8
- (4) Conical Washer 1/2”
- (4) Flat Washer 1/2”
- (4) Hex Nut M12x1.75 CL8
Safety Notes:
- Always wear safety glasses during installation.
- Check hitch frequently to ensure all fasteners and the ball are properly tightened.
- Replace damaged hitches or balls immediately.
- Do not cut access or attachment holes with a torch.
- Observe all safety precautions when working under the vehicle.
Specifications:
- Weight Carrying Capacity: 4,500 lbs (2,043 kg) trailer weight, 675 lbs (306 kg) tongue weight.
- Weight Distributing Capacity: 4,500 lbs (2,043 kg) trailer weight, 675 lbs (306 kg).
- Product complies with V.E.S.C. Regulation V-5 and SAE J684.
Attention: This is a summary of the installation procedure. For complete installation instructions, including diagrams and detailed information from the manufacturer, please download the full installation PDF.
Warranty Information:
- Duration: 1-year limited warranty from the date of purchase.
- Coverage: Covers defects in materials and workmanship under normal use conditions.
For complete warranty instructions, please download the full installation PDF.
Technical Support:
For technical support and assistance, our team of experts is available to help. You can reach our tech support by visiting www.trailerjacks.com or calling 877-869-6690.
Installation Instructions for T-Connector Adapter
Part Numbers:
- 118416
Tools Required:
- Screwdriver
- Drill (3/32” Drill Bit)
Step-by-Step Instructions:
-
Remove the Driver-Side Taillight:
- Open the rear liftgate.
- On the driver’s side, remove the screws that secure the taillight in place.
- Carefully pull the taillight away from the vehicle to expose the vehicle’s wiring harness connectors.
-
Disconnect the Wiring Harness:
- Separate the vehicle’s wiring connectors carefully, ensuring not to damage the locking tabs.
- Ensure all connector surfaces are clean and free of dirt.
- Plug the T-Connector harness between the connectors.
-
Ground the White Wire:
- Locate a suitable grounding point near the connector, such as an existing ground stud.
- If no ground stud is available, drill a 3/32” hole in a suitable area (do not drill into the vehicle floor or bed).
- Clean dirt and rustproofing from the area and secure the white wire using the provided eyelet and screw.
Caution:
- Verify what is behind any surface before drilling to avoid damage or injury.
-
Route the 4-Flat Connector:
- Route the T-Connector end with the 4-flat connector down through the taillight pocket, between the bumper and the body, toward the center of the bumper.
- Secure the wiring using the provided cable ties.
-
Secure the T-Connector Harness:
- Secure the remainder of the T-Connector harness with the provided cable ties, avoiding areas where the wire could be pinched, cut, or melted.
- Mount the 4-flat connector in an accessible location with a bracket or electrical box (not included).
-
Reinstall the Taillight:
- Reinstall the taillight removed in Step 1.
-
Test the Installation:
- Ensure all connections are complete for the T-Connector to function properly.
- Test the installation with a test light or trailer to verify functionality.
Specifications:
- Max. stop/turn light: (7.5 amps)
- Max. tail lights: (7.5 amps)
Safety Notes:
- Overloading circuits can cause fires. Do not exceed the lower of the towing manufacturer’s rating or the unit specifications.
- Follow all warnings and installation instructions carefully.
Manufacturer Notes:
- Read the vehicle owner’s manual and instruction sheet for additional guidance.
- Ensure all wiring is securely mounted and routed to prevent damage or interference.
Installation Instructions for T-Connector Adapter
Part Numbers:
- 118416
Tools Required:
- Screwdriver
- Drill (3/32” Drill Bit)
Step-by-Step Instructions:
-
Remove the Driver-Side Taillight:
- Open the rear liftgate.
- On the driver’s side, remove the screws securing the taillight.
- Carefully pull the taillight away from the vehicle to expose the wiring harness connectors.
-
Disconnect the Wiring Harness:
- Separate the vehicle’s wiring connectors carefully, ensuring not to damage the locking tabs.
- Ensure all connector surfaces are clean and free of dirt.
- Plug the T-Connector harness between the connectors.
-
Ground the White Wire:
- Locate a suitable grounding point near the connector, such as an existing ground stud.
- If no ground stud is available, drill a 3/32” hole in a suitable area (avoid drilling into the vehicle floor or bed).
- Clean dirt and rustproofing from the area and secure the white wire using the provided eyelet and screw.
Caution:
- Verify what is behind the surface before drilling to avoid damage or injury.
-
Route the 4-Flat Connector:
- Route the T-Connector end with the 4-flat connector down through the taillight pocket, between the bumper and the body, toward the center of the bumper.
- Secure the wiring using the provided cable ties.
-
Secure the T-Connector Harness:
- Secure the remainder of the T-Connector harness with the provided cable ties, avoiding areas where the wire could be pinched, cut, or melted.
- Mount the 4-flat connector in an accessible location with a bracket or electrical box (not included).
-
Reinstall the Taillight:
- Reinstall the taillight removed in Step 1.
-
Test the Installation:
- Ensure all connections are complete for the T-Connector to function properly.
- Test the installation with a test light or trailer to verify functionality.
Specifications:
- Max. Stop/Turn Light: 7.5 amps
- Max. Tail Lights: 7.5 amps
Safety Notes:
- Overloading circuits can cause fires. Do not exceed the lower of the towing manufacturer’s rating or the unit specifications.
- Follow all warnings and installation instructions carefully.
Attention: This is a summary of the installation procedure. For complete installation instructions, including diagrams and detailed information from the manufacturer, please download the full installation PDF.
Technical Support:
For assistance, visit www.trailerjacks.com or call 877-869-6690.
Related Products
Stock: In Stock
This Hitch Fits The Following Vehicles:
2007 - 2017 Jeep, Wrangler, All Styles, with standard factory bumper
2018 Jeep, Wrangler JK, All Sty..
$231.79
Stock: In Stock
4-Flat Mounting Bracket
Mounts electrical connector to attachment bracket
Includes screws and nuts
Attractive point-of-purchase packaging..
$14.21
Stock: In Stock
Attaches to any 2" receiver
Rubber construction tightly seals tube opening
Pin or clips are not required, simply push the cover into you 2" x 2" h..
$13.28
Stock: In Stock
Easy Access Lock w/Sleeve for 1-1/4" & 2" Square Receivers
Includes Dust Cap
Easy Access Models Feature Side Key Entry, Sliding Dust Cap, Lock Hou..
$26.30
Stock: In Stock
Draw•Tite® QSP™ Introducing the Draw•Tite® QSP™. Designed to work with most Cequent Performance Products, Class III 2” receivers (will not fit Ultra F..
$29.99
Stock: In Stock
More than just a hitch pin, J-Pin® quickly and confidently secures ball mounts and other hitch-mounted accessories, eliminating the sway and rattle ca..
$51.49
Stock: In Stock
ROLA®, TX-104 Bike Carrier, 4 Bike, 2" Sq. Receiver Mount, Folding Dual Arm Rail Rack w/Tilt Function, Integrated Retractable Cable Lock, Anti-Sway
..
$239.04
Stock: In Stock
Ball Mount Kit, 7,500 lbs. GTW, 1" Ball Hole, 8-1/2" Length, 3/4" Rise, 2" Drop, Black
Fits 2" square receiver tube opening
Includes pin..
$29.99
Stock: In Stock
Ball Mount Kit, 7,500 lbs. GTW, 1" Ball Hole, 8-1/2" Length, 3/4" Rise, 2" Drop, Black
Fits 2" square receiver tube opening
Includes pin..
$29.99
Stock: In Stock
Ball Mount Kit, 7,500 lbs. GTW, 1" Ball Hole, 9" Length, 2-3/4" Rise, 4" Drop, Black
Fits 2" square receiver tube opening
Includes pin a..
$38.17
Stock: In Stock
This Complete Brake Control Installation Wiring Kit features:
4-Way to 7-Way adapter w/ mounting bracket and screws
Retains use of 4-Flat Conn..
$99.00
Stock: In Stock
Includes Everything Pictured:
Custom Fit Front Mount Trailer Hitch
Security J-Pin
Installation Hardware
Installation Instructions
Fits The Foll..
$269.30
Stock: In Stock
Hitch Ball Specs:
Part Number
63845
Brand
Draw-Tite
Size
2" x 1" x 2-1/8"
Towing Ca..
$18.55
Stock: In Stock
Attaches to any 2" receiver
Rubber construction tightly seals tube opening
Pin or clips are not required, simply push the cover into you 2" x 2" h..
$6.78
Stock: Pre-Order
Rubber Economy Receiver Tube Cover w/"D" Logo for 2" Sq. Receivers, w/Header Card
Attaches to any 2" receiver
Rubber construction tightly seals tu..
$16.87
Stock: Pre-Order
Assortment Installation Hardware Kit - Bulk Packaged..
$150.50
Stock: In Stock
Receiver Lock, Dogbone Style, 5/8" for 2-1/2" Sq. Class V Receivers, Stainless Steel
Perfect for Class V hitches that have an outside width wider t..
$46.05
Stock: In Stock
Stainless Steel Combo Lock Set, 5/8" Dogbone Lock w/Sleeve for 1-1/4" and 2" Square Receivers and Coupler
Includes Dust Cap
Easy Access Models Fea..
$50.17
Stock: In Stock
5/8" Chrome Dogbone Lock w/ Chrome Coupler Lock
Stronger Break Resistance
Dual Self-locking Design
High Security Square Key Design
Includes Dust..
$47.02
Stock: In Stock
5/8" Chrome Bent Pin Lock
Stronger Break Resistance
Dual Self-locking Design
High Security Square Key Design
Includes Dust Cap
..
$30.05
Stock: In Stock
5/8" Chrome Dogbone Lock
Stronger Break Resistance
Dual Self-locking Design
High Security Square Key Design
Includes Dust Cap
..
$30.59
Stock: In Stock
Stainless Steel Dogbone Lock w/Sleeve for 1-1/4" & 2" Square Recievers
Includes Dust Cap
Easy Access Models Feature Side Key Entry, Sliding Dust ..
$38.27
Stock: In Stock
5/8" SS Dogbone Lock
Stronger Break Resistance
Dual Self-locking Design
High Security Square Key Design
Includes Dust Cap
..
$40.65
Stock: In Stock
Class V Barrel Style Towing Receiver Lock, 5/8 In. Diameter, 3-1/2 In. Span
The REESE Towpower class V barrel style (Dog bone), receiver lock is de..
$29.27
Stock: Pre-Order
LOCK PROFESSIONAL LIFE LONG 3"
The REESE Towpower class V barrel style (Dog bone), receiver lock is designed with a 4-in span for 3-in square tube ..
$33.79
Stock: In Stock
Easy Access II Bent Pin Towing Receiver Lock, 5/8 In. Diameter
The REESE Towpower easy access II towing receiver lock earned its named because of i..
$32.10
Stock: Pre-Order
Easy Access II Chrome Receiver Lock, Class V
Chrome design for improved appearance
3.5 In. span for Class III - V fit
Pick proof square key desig..
$29.62
Stock: In Stock
Class V Bent Pin Towing Receiver Lock, 5/8 In. Diameter, 3-1/2 In. Span
The REESE Towpower class V bent pin, receiver lock is designed with a 3-1/2..
$26.28
Stock: In Stock
Class V Barrel Style Towing Receiver Lock, 5/8 In. Diameter, 3-1/2 In. Span
The REESE Towpower class V barrel style (Dog bone), receiver lock is de..
$29.27
Stock: In Stock
Professional Towing Receiver Lock, 5/8 In., Chrome
REESE Towpower 5/8-in professional towing receiver locks are the most theft resistant locks in ..
$34.66
Stock: In Stock
Professional Towing Receiver Lock, 5/8 In., Stainless Steel
REESE Towpower 5/8-in professional towing receiver locks are the most theft resistant ..
$37.16
Stock: In Stock
LOCK DOGBONE RCVR KNURLED 5/8
The REESE Tactical class V barrel style (Dog bone), receiver lock is designed with a 3-1/2-in span for 2-1/2-in squar..
$29.45
Stock: In Stock
LOCK RECVR COUPLER & DUAL
The REESE Towpower combo locks include the brushed alumninum adjustable coupler lock and the easy access II dual bent p..
$40.07
Stock: In Stock
Easy Access II Dual Bent Pin Towing Receiver & Trailer Coupler Lock Combo
The REESE Towpower combo locks include the easy access II adjustable cou..
$46.47
Stock: In Stock
Receiver Lock, Barrel Style w/Bent Pin, 5/8" for 2-1/2" Sq. Receivers, 3-1/2" Span
Easy Access Models Feature Side Key Entry, Sliding Dust Cap, Lo..
$30.43
Stock: In Stock
Receiver Lock, Bent Pin, 1/2" for 1-1/4" Sq. Receivers & Fifth Wheel Base Rails
Easy Access Models Feature Side Key Entry, Sliding Dust Cap, Lock ..
$25.25
Stock: In Stock
Receiver Lock, Bent Pin, 5/8" for 2" & 2-1/2" Sq. Receivers
Easy Access Models Feature Side Key Entry, Sliding Dust Cap, Lock Housing Rotates 360 ..
$25.40
Stock: In Stock
Receiver Lock, 5/8" for 3" Sq. Class V Receivers, Sleeved to 3/4"
The Draw Tite 5/8-in diameter dogbone lock is primarily designed for towing and ..
$39.80
Stock: In Stock
Receiver Lock, Barrel Style w/Bent Pins, 1/2" for 1-1/4" Sq. Receivers & 5/8" for 2" Sq. Receivers
Easy Access Models Feature Side Key Entry, Slid..
$26.30
Stock: In Stock
Anti-Theft, Sleeved Receiver Hitch Pin with Lockable Swivel Latch & Brass Lock
REESE Towpower anti-theft, sleeved hitch pin with swivel latch is d..
$21.54
Stock: In Stock
Anti-Theft Towing 5/8 In. Hitch Pin with Swivel, Lockable Latch, and Brass Lock
REESE Towpower 5/8-in hitch pin with swivel latch is designed to s..
$21.97
Stock: In Stock
Easy Access Sleeved Receiver Lock with 360 Degree Rotating Head
The REESE Towpower easy access sleeved receiver lock and cable, earned its named b..
$38.27
-250x250.webp "Reese Trailer Hitch Lock 360 degree Rotating Head Tongue Tow Receiver 1/2\" and 5/8\" Pin For 2\" and 1-1/4\" Receivers")
Stock: In Stock
Easy Access II Dual Bent Pin Towing Receiver Lock, 1/2 In. and 5/8 In.
The REESE Towpower easy access II, dual bent pin towing receiver lock is de..
$31.08
Stock: Pre-Order
Ball Mount Specs:
Part Number
7390
Brand
Draw-Tite
Finish
Black Powdercoat over E-C..
$208.64
Stock: In Stock
Adjustable Dual Ball Mount, 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW)
Adjustable Dual Ball Mount System Head Unit Only
Adjustable..
$158.49
Stock: In Stock
Adjustable Dual Ball Mount Draw-Bar System 2" Sq. Shank 2" Tow Ball 10000 lbs 2-5/16" Ball 14000 lbs
Adjustable Dual Ball Mount System, 2" Sq. Shank, 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW)
Adjustable height - Perfect for towing ..
$264.62
Stock: In Stock
Adjustable Tow Bar, 5,000 lbs. GVW Capacity
Light-weight, only 31 lbs.
Arms adjust from 26" to 41" for universal fit
Tow bar mounting brackets b..
$233.43
Stock: In Stock
Adjustable Tri-Ball Ball Mount System w/Step, 2" Sq. Shank
Designed as an accessory for the Draw Tite Rotating Tri Ball, this keyed alike lock set..
$285.79
Stock: In Stock
Forged D-Ring w/Mounting Bracket, Yellow Zinc
Draw-Tite Forged D-Ring provides high-quality security, while serving handling mulitple weights
1/2..
$20.81
Stock: Pre-Order
Forged D-Ring w/Weld On Mounting Bracket, c1045 Material, 26,500 lbs.
Draw-Tite Forged D-Ring provides high-quality security, while serving handli..
$29.90
Stock: In Stock
Forged D-Ring w/Mounting Bracket, Yellow Zinc
Draw-Tite Forged D-Ring provides high-quality security, while serving handling mulitple weights
1/2..
$39.53
Stock: Pre-Order
Forged D-Ring w/Weld On Mounting Bracket, c1045 Material, 26,500 lbs.
Draw-Tite Forged D-Ring provides high-quality security, while serving handli..
$56.54
Stock: In Stock
Professional Bent Pin, Towing Receiver Lock, 5/8 In., Chrome
Patented design eliminates weak points
Ball bearing lock system prevents theft even ..
$29.75
Stock: In Stock
Professional Towing Receiver Lock, 5/8 In., Chrome
Patented design eliminates weak points
Ball bearing lock system prevents theft even if lock is..
$29.92
Stock: In Stock
Towing Receiver Lock, Dual Bent Pin, 5/8 In. and 1/2 In.
This REESE Towpower bent pin hitch receiver lock with interchangeable pins is designed to..
$25.58
Stock: In Stock
Reese Trailer Hitch Lock Bent Pin Tongue Tow Receiver 1/2" For 1-1/4" Receivers and Fifth 5th Wheels
Towing Ball Mount Lock, 1/2 In.
REESE Towpower ball mount lock is designed to provide safety to the ball mount and trailer from theft. It features..
$21.45
Stock: In Stock
Towing Draw Bar Lock 5/8 In. Diameter
REESE Towpower anti-theft, locking hitch pin is designed to secure a ball mount in the hitch receiver. It fe..
$21.66
-250x250.webp "Reese Trailer Hitch Lock Black Nickel Dog Bone Style Tongue Tow Receiver 1/2\" and 5/8\" Pin For 2\" and 1-1/4\" Receivers")
Stock: In Stock
Elite Black Nickel Sleeved, Dogbone Receiver Lock
Keep your towing secure with this handsome black nickel receiver lock
Sleevd to fit both 1/2 an..
$26.35
-250x250.webp "Reese Trailer Hitch Lock Dog Bone Tongue Tow Receiver 1/2\" and 5/8\" Pin For 2\" and 1-1/4\" Receivers")
Stock: In Stock
Barrel Style Sleeved Towing Receiver Lock
This REESE Towpower barrel style (Dog bone), receiver lock with sleeve is designed to secure both 5/8-in..
$34.82
Stock: In Stock
Reese Trailer Hitch Lock Dog Bone Tongue Tow Receiver 5/8" Pin For 2" Receivers Push-Button Key Lock
Towing Receiver Lock, Dog Bone Style, 5/8 In.
REESE Towpower barrel or dog bone style receiver lock is designed to provide excellent protection fo..
$26.66
Stock: Pre-Order
Easy Access II Sleeved Towing Receiver Lock, 5/8 In. and 1/2 In.
The REESE Towpower easy access II, sleeved towing receiver lock is designed t..
$26.49
Stock: Pre-Order
Easy Access II Stainless Steel Class V Towing Receiver Lock
The REESE easy access stainless steel, class V receiver lock is designed to provide se..
$36.29
Stock: In Stock
Easy Access Sleeved Receiver Lock with 360 Degree Rotating Head
The REESE Towpower easy access receiver lock earned its named because of its 360..
$25.83
Stock: Pre-Order
Easy Access Stainless Steel Towing Receiver Lock, Sleeved, 5/8 In.
The REESE Towpower easy access stainless steel receiver lock features a convenie..
$31.08
Stock: In Stock
Elite Black Nickel Sleeved, Dogbone Receiver Lock
The REESE Towpower, elite black nickel, dogbone style receiver lock includes a sleek black nic..
$28.34
Stock: In Stock
Stainless Steel Sleeved Barrel-Style Receiver Lock
The REESE Towpower, stainless steel, barrel- style receiver lock includes a stainless steel sle..
$36.35
Stock: In Stock
Tow and Store Anti-Theft Lock Kit, Keyed Alike
REESE Towpower tow and store anti-theft lock kit includes the necessary locks to provide the comple..
$51.13
Stock: In Stock
Combo Lock Set, 5/8" for 2" Sq. Receiver and 3/4" for Accessory (Keyed Alike)
Dual dogbone pin receiver lock, for 5/8 In. receivers
3/4" In for A..
$47.64
Stock: In Stock
Professional Towing Receiver Lock, 5/8 In., Stainless Steel
Designed for marine use, Fulton brand receiver locks are time-tested and application-p..
$37.47
Stock: In Stock
Receiver Lock, Dead Bolt, 5/8" for 2" Sq. Receivers, Black Finish (Keyed Alike)
This keyed alike 1/2 inch receiver lock allows the user to purchas..
$83.64
Stock: In Stock
Clevis Ball Mount, 2" Sq. Hollow Shank, 11" Length, Rating 6,000/600 lbs. as Ball Mount w/1-1/4" Drop, Rating 6,000/600 lbs. as Clevis Mount w/3" Drop..
$95.29
Stock: In Stock
Dual-Ball Ball Mount, 2" Sq. Solid Shank, 8" Length, w/Black 2" & 2-5/16" Balls, Black
The Draw-Tite dual-ball ball mount features a 2 In. hitch b..
$91.49
Stock: In Stock
Dual Ball Ball Mount, 2" Sq. Solid Shank, 8" Length, w/Chrome 2" & 2-5/16" Balls, Black
Fits 2" square receiver tube opening..
$94.52
Stock: In Stock
Tri-Ball Ball Mount, 2" Sq. Hollow Shank w/Black 1-7/8", 2", & 2-5/16" Balls - Black
Fits 2" square receiver tube opening..
$79.89
Stock: In Stock
Tri-Ball Ball Mount, 2" Sq. Hollow Shank w/Chrome 1-7/8", 2", & 2-5/16" Balls - Black
Fits 2" square receiver tube opening..
$87.30
Stock: In Stock
Tri-Ball Ball Mount, 2" Sq. Solid Shank w/Black 1-7/8", 2", & 2-5/16" Balls, Black
Fits 2" square receiver tube opening
Draw-Tite Tri-Ball ball..
$88.32
Stock: In Stock
Tri-Ball Ball Mount, 2" Sq. Solid Shank w/Chrome 1-7/8", 2", & 2-5/16" Balls, Black
Fits 2" square receiver tube opening..
$105.35
Stock: Pre-Order
Tri-Ball Ball Mount, 2-1/2" Sq. Hollow Shank w/Black 1-7/8", 2", & 2-5/16" Balls, Black
The REESE Titan Class V Tri-Ball ball mount provides conve..
$84.74
Stock: In Stock
Towing Starter Kit, w/InterLock® (Hex) Feature Ball Mount 2" Sq. x 8-1/2"L x 2"D x 3/4"R, 6000 lbs. & 2" Hitch Ball w/Lock, Plastic Storage Case
I..
$90.66
Stock: Pre-Order
Fold down licence plate cover
..
$58.00
Stock: In Stock
Outboard Motor Lock
Keep your Outboard motor safe and secure with the FULTON Outboard Motor Lock
Heavy-duty barrel key lock mechanism for maxim..
$47.34
Stock: In Stock
Reducer Bushing 1" to 3/4"
Allows 3/4" or 1" shank hitch balls, used in ball mounts w/1" or 1-1/4" holes
REESE Towpower reducer bushing allows ..
$13.85
Stock: In Stock
Reducer Bushing, 1-1/4" to 1"
Allows 3/4" or 1" shank hitch balls, used in ball mounts w/1" or 1-1/4" holes
For over 55 years REESE Towpower ha..
$14.45
Stock: Pre-Order
Replacement Part, Super Titan, 3/4" Hitch Pin and Clip for 3" Sq. Receivers
Titan Heavy Duty hitch pin and clip is designed to secure a ball moun..
$54.34
Stock: In Stock
Solo Hitch Alignment System
Convenient one person hitch alignment system
Magnetic base for fast and easy location
Telescoping rods adjust up to ..
$43.38
Stock: Pre-Order
Fastener Kit for Ford Truck Applications
Replacement fastener kit for 3-piece Class III receiver hitches:
Draw-Tite #41504
Hidden Hitch #87480..
$40.89
Stock: In Stock
Fastener Kit for Receivers
Replacement fastener kit for:
Draw-Tite #36127
Draw-Tite #41115
Draw-Tite #41546
Draw-Tite #75191
Draw-Tite #7531..
$32.22
Stock: In Stock
1/2" Integral Pin & Clip for 1-1/4" Sq. Receivers - Zinc
1/2" Hitch pin with integrated swivel pin
Zinc plated
Limited 1 year warranty
..
$18.66
Stock: In Stock
5/8" Integral Pin & Clip for 2" Sq. Receivers - Stainless
5/8" Hitch pin with integrated swivel pin
Stainless steel construction
Limited 1 year ..
$25.49
Stock: In Stock
1/2" Hitch Pin for 1-1/4" Class I and Class II, Zinc
Packaged
1 Year Warranty
..
$16.48
Stock: In Stock
5/8" Grooved Style Hitch Pin and Clip for 2" Sq. Receivers
Packaged
1 Year Warrranty
..
$17.14
Stock: In Stock
5/8" Hole Style Hitch Pin and Clip for 2" Sq. Receivers
Heavy Duty
Packaged
1 Year Warranty
..
$17.14
Stock: In Stock
Receiver Pin & Clip, 5/8" for 3" Sq. Class V Receivers, 4" Span, Sleeved to 3/4"
The Draw Tite 5/8-in diameter pin and clip is primarily designed..
$25.99
Stock: In Stock
Elite™ Series Under-Bed Gooseneck Accessories Kit (Includes: (1) 2-5/16" Pop-In™ Ball #19311, (1) Storage Bag, (2) Safety Chain Attachments & (1) Hole..
$256.86
Stock: In Stock
Ball Mount Kit, 7,500 lbs. GTW, 1" Ball Hole, 9" Length, 2-3/4" Rise, 4" Drop, Black
Fits 2" square receiver tube opening
Includes pin a..
$50.73
Stock: Pre-Order
This Shank is desinged for use with the TX or NV2 Bike Carriers (#59400, #59403, #59508) from ROLA or the Eclipse (#63120 #63123), SportWing (#1370100..
$65.33
-250x250.webp "Front Mount Trailer Tow Hitch Hardware Fastener Kit For 07-17 Jeep Wrangler 2018 Wrangler JK")
Stock: In Stock
This Hitch Hardware Fastener Kit Fits The Following Vehicles:
2007 - 2017 Jeep, Wrangler, All Styles, with standard factory bumpe..
$56.43
Stock: In Stock
Includes Everything Pictured:
Prewired Adapter 7-Way to 4-Way Adapter
Mounting Bracket, 7-Way w/ Hardware
Trailer Brake Controller Installation ..
$59.39
Stock: In Stock
Ball Mount Draw-Bar Kit 7500 lbs 9" Long 2-3/4" Rise 4" Drop Fits 2" x 2" Trailer Hitch Receiver
Draw-Tite Ball Mount made out of heavy duty steel ..
$43.57
