For 2003-2007 Toyota Land Cruiser 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P3 Brake Controller + Plug & Play Adapter By Tekonsha
Model: 119178 85343 20506 7012A 90195 3040-P-587896This Bundle Fits The Following Vehicles:
2003-2007 Toyota Land Cruiser
This Bundle Includes the Following Parts:
-
7-Way RV Wiring
Manufactured by: Tekonsha
-
Tekonsha Prodigy P3 Brake Control
Manufactured by: Tekonsha
-
Plug & Play BC Adapter
Manufactured by: Tekonsha
List of fitment years:
2003, 2004, 2005, 2006, 2007
Taillight Converter with Integrated Circuit Protection
Manufactured by: Tekonsha
-
This unit rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
-
Adapts import and domestic vehicles with separate turn and stop lights (3 wire system to standard trailer taillight wiring (2 wire system)
-
Will work with either LED/Incandescent bulbs (vehicle & trailer)
-
Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
-
Designed not to send feedback thru the vehicle circuits
-
All solid-state components in potted encapsulation
-
Will not work with vehicles with low-side switch
-
Includes integrated protective cover
Wiring Adapter, 7-Way Flat to 4-Way Flat
Manufactured by: Reese Towpower
-
REESE Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector
-
Sealed connection increases protection against moisture & corrosion
-
Low profile design provides factory installed appearance
-
Built with heavy-duty rugged materials
-
Included 4-Flat dust cover and heavy-duty spring on 7-Way connector
-
Butt connectors pre-attached for quicker wiring
-
Mounting bracket included
-
Mounting hardware included
Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only
Manufactured by: Tow Ready
Includes all necessary parts required to completely install all brake controls. No other parts are necessary.
Circuit Breaker, 30 Amp
Manufactured by: Tekonsha
Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.
Prodigy P3® Proportional Brake Controller for Trailers with 1-4 Axles, Black
Manufactured by: Tekonsha
-
P3 the industries most advanced electric trailer brake control. A true proportional braking system, P3 has several added features, making it the new standard for electric trailer brake controls.
-
5 storable setting options for pulling different trailers or preferences of multiple drivers.
-
A distinct, easy-to-read LCD display with multiple screen color options.
-
Up-Front controls provide easy access to all P3 features.
-
Easy to understand diagnostics show output current, battery, brake, and output voltage.
-
A flashing red warning system alerts the user to No Trailer Brake situations.
-
Select Electric over Hydraulic or Electric trailer brake mode.
-
Screen information displayed in English, French, or Spanish.
-
The Original Boost feature allows for different levels of customized braking.
-
Compact, dash-hugging design.
-
Integrated Plug-N-Play port for 2-plug adapters.
-
Snap-in mounting clip allows the user to remove and store the control when not in use.
-
Electric trailer brake control for up to 4 braking axles.
-
Limited Lifetime Warranty
Trailer Brake Controller Wiring Harness
Manufactured by: Tekonsha
Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.
$458 99
- Best Price on Web Guarantee
- Fastest Shipping
- FREE Shipping
- In Stock
We match lower prices from major authorized retailers for brand-new products in original packaging, provided the item is in stock. The competing seller must be an authorized, professional retail business; offers from
individuals, auctions, peer-to-peer sites, or unauthorized sellers don’t qualify. Used, refurbished, or open-box items are excluded.
Please see our full terms for details.
$458 99
Questions? Call our Auto Experts at (877) 869-6690
Get it now, pay later
Select installments at checkout to split your purchase into 4 interest-free payments of $ every 2 weeks.
- No fees, ever.
- No impact on your credit score.
Payment options are offered by Affirm and are subject to an eligibility check and might not be available in all states. CA Residents: Loans by Affirm Loan Services, LLC are made or arranged pursuant to a California Finance Lender license.
Installments in partnership with
.
Affirm and its offerings are supported in English only. Translations are not provided by Affirm.
You are in!
We will alert you the moment it is back.
Don't Miss the Next Restock!
We are working hard to bring this back. Join our VIP list to get an instant alert the second it is available.
Product Details
- Brand: Tekonsha
- Model: 119178 85343 20506 7012A 90195 3040-P-587896
This Bundle Fits The Following Vehicles:
2003-2007 Toyota Land Cruiser
This Bundle Includes the Following Parts:
-
7-Way RV Wiring
Manufactured by: Tekonsha
-
Tekonsha Prodigy P3 Brake Control
Manufactured by: Tekonsha
-
Plug & Play BC Adapter
Manufactured by: Tekonsha
List of fitment years:
2003, 2004, 2005, 2006, 2007
Taillight Converter with Integrated Circuit Protection
Manufactured by: Tekonsha
-
This unit rated for up to 2.1 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
-
Adapts import and domestic vehicles with separate turn and stop lights (3 wire system to standard trailer taillight wiring (2 wire system)
-
Will work with either LED/Incandescent bulbs (vehicle & trailer)
-
Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
-
Designed not to send feedback thru the vehicle circuits
-
All solid-state components in potted encapsulation
-
Will not work with vehicles with low-side switch
-
Includes integrated protective cover
Wiring Adapter, 7-Way Flat to 4-Way Flat
Manufactured by: Reese Towpower
-
REESE Towpower dual port adapter offers the most convenient way to upgrade your vehicle from a standard 4-way flat connector to have both the versatility of a 4-way flat along with the capabilities of the 7-way round connector
-
Sealed connection increases protection against moisture & corrosion
-
Low profile design provides factory installed appearance
-
Built with heavy-duty rugged materials
-
Included 4-Flat dust cover and heavy-duty spring on 7-Way connector
-
Butt connectors pre-attached for quicker wiring
-
Mounting bracket included
-
Mounting hardware included
Trailer Brake Controller Installation Kit, Vehicle and Trailer, Wiring Only
Manufactured by: Tow Ready
Includes all necessary parts required to completely install all brake controls. No other parts are necessary.
Circuit Breaker, 30 Amp
Manufactured by: Tekonsha
Used in 6, 12 and 24V DC applications. Automotive, R.V., air conditioners, battery chargers, any application requiring over-current protection. Non-corrosive molded cover eliminates grounding when operating against a fault line. Includes mounting bracket and installed nuts and washers.
Prodigy P3® Proportional Brake Controller for Trailers with 1-4 Axles, Black
Manufactured by: Tekonsha
-
P3 the industries most advanced electric trailer brake control. A true proportional braking system, P3 has several added features, making it the new standard for electric trailer brake controls.
-
5 storable setting options for pulling different trailers or preferences of multiple drivers.
-
A distinct, easy-to-read LCD display with multiple screen color options.
-
Up-Front controls provide easy access to all P3 features.
-
Easy to understand diagnostics show output current, battery, brake, and output voltage.
-
A flashing red warning system alerts the user to No Trailer Brake situations.
-
Select Electric over Hydraulic or Electric trailer brake mode.
-
Screen information displayed in English, French, or Spanish.
-
The Original Boost feature allows for different levels of customized braking.
-
Compact, dash-hugging design.
-
Integrated Plug-N-Play port for 2-plug adapters.
-
Snap-in mounting clip allows the user to remove and store the control when not in use.
-
Electric trailer brake control for up to 4 braking axles.
-
Limited Lifetime Warranty
Trailer Brake Controller Wiring Harness
Manufactured by: Tekonsha
Our 2-Plug units are designed for brake controls that have a wiring port built into the back of the unit. Simply plug the brake control end of the wiring harness into the back of the brake control and the vehicle end into the automobile's port. Brake controls that utilize the 2-plug style of wiring harness will be identified with the Plug & Play logo.
| Default | |
| Brand | Tekonsha |
| Connector Function | Multi-Function Adapter |
| Part Type | Undercar Wires for Brake Control |
| BC Connector Install Type | Plug&Play |
| Brake Controller Type | Proportional Inertia Based |
| Includes | 2 30 Amp Circuit Breakers |
| Trailer Wiring Output Type | Dual 4-Flat+7-Way Round |
| Compatibility | All Tekonsha, Pro Series, Draw-Tite & Reese Brake Controllers |
| Connector Design | Plug and Lead |
| Self Leveling | Yes |
| Trailer Wiring Install Style | Hardwire |
| Display Type | Full LCD Display |
| Number of Axles | 1 to 4 |
| Warranty | Lifetime |
Ask a Question about For 2003-2007 Toyota Land Cruiser 7 Way Trailer Wiring RV 7 Pin 7 Blade + Tekonsha Prodigy P3 Brake Controller + Plug & Play Adapter By Tekonsha
Be the first to ask a question.